Adjustment of the limit switch was probably not correctly executed. First of all, you must identify your motor using the product label. Then, using the manual or our Youtube channel, find all the steps to execute to set them correctly...
Programming of the limit switches can be mechanical (adjustments to execute directly on the motor head) or electronic (adjustments to execute using the remote control or cabled buttons). First of all, you must identify your motor using the product label. Then, using the manual or...
We have specific motors for each type of awning, the important this is to identify exactly the type of awing to move and then, using the product section on our site, choose the most suitable one for the functioning logic and power....
The opening direction was not configured correctly. Niuba leaves our warehouses with opening to the right by default, while it was probably installed to open to the left. Use the “dir” parameter to resolve your problem....
Probably, a condition has occurred that caused the encoder to lose alignment. After the first slowed closure, the system should restart as normal....
The boom is probably not correctly balanced. Try to release the boom and check if it is positioned 45° and maintains this position. If maintained, you can execute new learning of the forces and the problem should resolve itself. Instead, if not maintained, call your...
This product is sold in modular mode since the situations are multiple. You should definitely buy the anchorage bracket for the cabinet, the boom (standard or round if there is wind), its relevant fastening (based on the boom chosen) and the support (fixed or mobile)....
Probably, the mechanical mechanism of the door has some friction or blockage which wasn’t there before. First of all check correct balancing of the door and fluid movement by moving it manually. If you can’t find anything unusual, execute new learning of the forces (look...
Based on the product you have installed, you have different options. First of all, you must identify exactly what control unit or receiver you have via the product label. Lastly, the manual or our Youtube channel has all the steps to do this...
All our digital control units allow you to load a default which returns the control unit to its initial configuration when you installed it for the first time. In our manual or on our Youtube channel you can find a series of tutorial videos to...
Argo is a 230V irreversible electro-mechanical actuator for shutters weighing 160 to 300 Kg. Available in a version with an electro-brake or without....
Vega is a 230V irreversible electro-mechanical actuator for pivoting doors up to 9 m²....
Atris is a 24V irreversible electro-mechanical actuator for sectional and pivoting doors up to 15 m². The maximum force is 1000 N (100 Kg) It is available in 700N and 1000N versions....
Azimut is a 24V irreversible electro-mechanical actuator for sectional and pivoting doors up to 8 m². The maximum force is 500 N (50 Kg)...
Normally, there are three types of garage doors, sectional, pivoting (which are sub-divided into two further versions) or shutter. For sectional doors, you can choose the Azimut and Atris centre roof motors (based on the dimensions of the door). For pivoting doors, you can always...
It may be mechanical friction of the gate itself due to wear, or deterioration of the start condenser (for 230V motors). In the first case, you can try to unlock the motor and try to move it manually (you will realise as it is more...
This situation is used to warn you to run a routine maintenance check on your gate. If is a specific function inserted to help you conduct the correct periodic control on the gate to check everything is in place and execute those operations necessary to...
The most frequent causes can be the remote control battery (in this case with another remote control it will probably move), or there may be a malfunctioning safety device (photocells and/or sensitive edges), of the command control unit or the motor itself. While for the...
The problem may be the remote control battery is flat. Try and replace it, check the LED switches on and try to activate the gate; with any activation, the gate should normally move again....
Pay utmost attention to the weight of the gate, referring to the technical features, to choose the motor with the correct power to move it....
If you want the gate to open automatically, even when there is no electricity, or it has to work without connection to the electricity line, you have to choose a 24V motor (adding a backup battery to the system in the first case, or using...
If you have 1 to 20 openings per day (residential use), you can easily use a 230V electro-mechanical motor, while if the number of openings increase, you should choose a 24V electro-mechanical motor, or 230V inverter motor (for heavier use)....
There are different types of motors to use based on the characteristics of the gate and according to the type of use. It is therefore important to firstly understand exactly what your needs are....
For the most common gates, you can find a kit already created by us with everything you need for a minimum installation (LIGHT version) or with accessories (FULL version). For motors not sold in a kit however, you can combine an “electronic kit” to complete...
All our irreversible motors offer the possibility of being unlocked with a key and being moved manually....
The Vulcan is an irreversible electro-mechanical gearmotor for underground assembly for swing gates with leaves up to 3.5 m long. Available in a 24V and 230V version...
Blitz is an irreversible electro-mechanical actuator with articulated arm for swing gates with leaves up to 3 m long. Available in a 24V and 230V version....
Ciclon is a 230V irreversible electro-mechanical actuator with articulated arm for swing gates with leaves up to 2.5 m long....
Drys is a 230V hydraulic actuator for swing gates with leaves up to 7 m long. Available in a reversible or irreversible version....
Zariss is a 24V irreversible electro-mechanical with articulated arm. With this motor, you can automate swing gates with leaves up to 2.2 m long....
Ursus is a 230 V hydraulic actuator for swing gates with leaves up to 6 m long....
Bingo is an irreversible electro-mechanical actuator. With motors from the Bingo range, you can automate swing gates with leaves up to 5 m long. Available in a 24V and 230V version...
Calypso is an irreversible electro-mechanical actuator for swing gates with leaves up to 4 m long. Available in 3 versions, 400, 500 and 600 mm....
Axil is an irreversible electro-mechanical actuator for swing gates with leaves up to 2.8 m long. Available in a 24V and 230V version....
If you still have to make the gate, I would advise you to evaluate an underground motor, which would have no visual impact on your new gate....
Pay utmost attention to the weight of the gate and the installation measurements, by referring in the first case to the technical features, while in the second case refer to the tables outlined in the manuals. Since, in some cases, particularly due to the measurements...
If you want the gate to open automatically, even when there is no electricity, or it has to work without connection to the electricity line, you have to choose a 24V motor (adding a backup battery to the system in the first case, or using...
If you have 1 to 20 openings per day (residential use), you can easily use a 230V electro-mechanical motor, while if the number of openings increase, you should choose a 24V electro-mechanical motor, or 230V hydraulic motor (for heavier use)....
There are different types of motors to use based on the characteristics of the gate and according to the type of use. It is therefore important to firstly understand exactly what your needs are....
If it’s an awning, and you also have an anemometer sensor connected (to close the awning when windy), it may have blocked for safety reasons (8 minutes from when the wind went under the intervention threshold). Check the anemometer is turning and wait 10 minutes...
